New & Refurbished Cisco SwitchProbe
Cisco SwitchProbe devices are hardware products with embedded firmware, designed to collect statistical information of an attached network segment. Using the various Cisco SwitchProbe models, you can monitor different network topologies such as Ethernet, Fast Ethernet, Gigabit Ethernet, Multiport Fast Ethernet, Token Ring, Wide Area Network (WAN), OC-3 and DS-3 Asynchronous Transfer Mode (ATM), Fiber Distributed Data Interface (FDDI), and High-Speed Serial Interface (HSSI).
Each SwitchProbe device contains specialized firmware known as agent code. In addition to gathering statistics, the SwitchProbe device supports filters and packet. Capture RMON1 groups so you can examine individual packets or sequences of packets to identify and isolate network problems. The device also supports all RMON2 groups and can decode packets from the network layer through the application layer of the OSI model. With this feature, you can monitor traffic on the basis of network layer protocols and addresses, and monitor application-level traffic.
SwitchProbe devices support Remote Monitoring1 (RMON1), Remote Monitoring2 (RMON2), and Cisco's enhanced RMON extensions. These devices provide complete protocol monitoring and decoding when used with a client equipped with protocol decode software. All models also support the MIB II system and interface groups.
Cisco SwitchProbe Chassis
|
WS-PB6-1ETH-16 |
SwitchProbe, One Port Ethernet, 16MB |
|
WS-PB6-1ETH-8 |
SwitchProbe, One Port Ethernet, 8MB |
|
WS-PB6-1TR-16 |
SwitchProbe, One Port Token Ring, 16MB |
|
WS-PB6-1TR-8 |
SwitchProbe, One Port Token Ring, 8MB |
|
WS-PB6-1WANETH-16 |
SwitchProbe, One Port WAN and Eth, 16MB incl. V.35 Tap Kit |
|
WS-PB6-1WANETH-8 |
SwitchProbe, One Port WAN and Eth, 8MB incl. V.35 Tap Kit |
|
WS-PB6-1WANTR-16 |
SwitchProbe, One Port WAN and Token Ring, 16MB incl V.35 Tap |
|
WS-PB6-1WANTR-8 |
SwitchProbe, One Port WAN and Token Ring, 8MB incl V.35 Tap |
|
WS-PB6-2ETH-16 |
SwitchProbe, Two Port Ethernet, 16MB |
|
WS-PB6-INTF-ETH |
Ethernet Interface Kit (PB6) |
|
WS-PB7-2WANETH-32 |
SwitchProbe, Two Port WAN and Eth, 32MB incl 2 V.35 Taps |
|
WS-PB7-2WANTR-32 |
SwitchProbe, Two Port WAN and TR, 32MB incl 2 V.35 Taps |
|
WS-PB7-4WANETH-32 |
SwitchProbe, Four Port WAN and Eth, 32MB incl 4 V.35 Taps |
|
WS-PB7-4WANTR-32 |
SwitchProbe, Four Port WAN and TR, 32MB incl 4 V.35 Taps |
|
WS-PB7-INTF-FEFX |
Half Duplex 100BaseFX Interface Kit (PB7) |
|
WS-PB7-INTF-FETX |
Half Duplex 100BaseTX Interface Kit (PB7) |
|
WS-PB7-INTF-WAN |
WAN Interface Kit (PB7) includes V.35 WAN Tap Kit |
|
WS-PB8-1FEFD-FX-32 |
SwitchProbe, One Port FE, FDX, FX, Eth Sdbnd, 32MB incl Tap |
|
WS-PB8-1FEFD-TX-32 |
SwitchProbe, One Port FE, FDX, TX, Eth Sdbnd, 32MB incl Tap |
|
WS-PB8-1FEHD-FX-32 |
SwitchProbe, One Port FE, Half Duplx, FX, Eth Sideband, 32MB |
|
WS-PB8-1FEHD-TX-32 |
SwitchProbe, One Port FE, Half Duplx, TX, 32MB |
|
WS-PB8-2CHE1ET-128 |
SwitchProbe, 2 Port Channlized E1/D & Eth, 128MB incl Tap |
|
WS-PB8-2CHT1ET-128 |
SwitchProbe, Two Port Channelized T1/D, Eth Sideband, 128MB |
|
WS-PB8-2E1D-ETH-32 |
SwitchProbe, 2 Port E1/D WAN& Eth, 32MB incl RJ48 Tap |
|
WS-PB8-2FEHD-FX-32 |
SwitchProbe, Two Port FE, Half Duplx, FX, Eth Sideband, 32MB |
|
WS-PB8-2FEHD-TX-32 |
SwitchProbe, Two Port FE, Half Duplx, TX, Eth Sideband, 32MB |
|
WS-PB8-2GE-LX-M-64 |
SwitchProbe, 2 Port Gig Eth, LX, MultiMode, 64MB incl Tap |
|
WS-PB8-2GE-LX-S-64 |
SwitchProbe, 2 Port Gig Eth, LX, SnglMode, 64MB (incl Tap) |
|
WS-PB8-2GE-SX-M-64 |
SwitchProbe, 2 Port Gig Eth, SX, MultiMode, 64MB (incl Tap) |
|
WS-PB8-2T1D-ETH-32 |
SwitchProbe, 2 Port T1/D WAN & Eth, 32MB incl RJ48 Tap |
|
WS-PB8-2WANETH-64 |
SwitchProbe, 2 Port T1/E1 WAN and Eth, 64MB incl 2 V.35 Taps |
|
WS-PB8-2WANTR-64 |
SwitchProbe, 2 Port T1/E1 WAN and TR, 64 MB incl 2 V.35 Taps |
|
WS-PB8-4E1D-ETH-64 |
SwitchProbe, 4 Port E1/D WAN & Eth, 64MB incl 2 RJ48 Taps |
|
WS-PB8-4ETH-32 |
SwitchProbe, Four Port Ethernet, Eth Sideband, 32MB |
|
WS-PB8-4FE-FX-64 |
SwitchProbe,Four Port FE, FX, Eth Sdbnd, 64MB incl FO Splttr |
|
WS-PB8-4FE-TX-64 |
SwitchProbe, Four Port FE, TX, Eth Sdbnd, 64MB incl FEFD Tap |
|
WS-PB8-4T1D-ETH-64 |
SwitchProbe, 4 Port T1/D WAN and Eth, 64MB incl 2 RJ48 Taps |
|
WS-PB8-4WANETH-64 |
SwitchProbe, 4 Port T1/E1 WAN and Eth, 64MB incl 4 V.35 Taps |
|
WS-PB8-4WANTR-64 |
SwitchProbe, 4 Port T1/E1 WAN and TR, 64MB incl 4 V.35 Taps |
|
WS-PB8-8ETH-64 |
SwitchProbe,8 Port Ethernet, Eth Sideband, 64MB |
|
WS-PB8-ATM3ETH-64 |
SwitchProbe, ATM (OC-3) and Eth, 64MB incl FO Splttr |
|
WS-PB8-ATMDSETH-64 |
SwitchProbe, ATM (DS-3) and Ethernet, 64MB (incl Tap Kit) |
|
WS-PB8-DFDDIETH-32 |
SwitchProbe, FDDI (DAS) and Ethernet, 32MB |
|
WS-PB8-HSSIETH-32 |
SwitchProbe, HSSI and Ethernet, 32MB incl HSSI Tap |
|
WS-PB8-INTF-WAN |
Two WAN Interface Kits includes 2 V.35 WAN Tap Kits |
|
WS-PB8-SFDDIETH-32 |
SwitchProbe, FDDI (SAS) and Ethernet, 32MB |
|
WS-PB-ART |
ART Monitor Option |
Cisco SwitchProbe Accessories
|
WS-PB6-MEM-16MB |
16MB Memory Kit for PB6 |
|
WS-PB6-MEM-32MB |
32MB Memory Kit for PB6 |
|
WS-PB7-8-MEM-32MB |
32MB Memory Kit for PB7 and PB8 |
|
WS-PB7-8-MEM-64MB |
64MB Memory Kit for PB7 and PB8 |
|
WS-PB-CAB-WAN-X211 |
Tap Cable for T1/E1 WAN SwitchProbe (X.21 Single Clock) |
|
WS-PB-DS3ATM-TAP |
Additional DS-3 ATM Tap Kit |
|
WS-PB-FEC-FX |
FEC Monitor Opt(4 port MFE SPs only;incl 1 FO Splitter Kit) |
|
WS-PB-FEC-TX |
FEC Monitor Opt (4 port MFE SPs only; incl 1 TX Tap Kit) |
|
WS-PB-FEFDTAP-TX |
Addtl Passive-Passthrough Active Repeating Tap Kit |
|
WS-PB-FETX-PWRSUP |
Additional Power Supply for the FEFD-TX tap kit |
|
WS-PB-FOS-60-40-M |
Additional 60/40 Multi-Mode Fiber Optic Splitter (GE) |
|
WS-PB-FOS-60-40-S |
Additional 60/40 Single-Mode Fiber Optic Splitter (GE) |
|
WS-PB-FOS-RACKPNL |
Fiber Optic Splitter Rack Panel |
|
WS-PB-HSSI-TAP |
Additional HSSI Tap Kit incl. Cables |
|
WS-PB-NFM |
Netflow Monitor Option |
|
WS-PB-OPTI-SPLT1 |
Addtl Multi-mode Fiber Optic Splttr for FEFD-FX and ATM SPs |
|
WS-PB-RACKMNT |
Shelf for Rack Mounting (holds 5 PB6 or 3 PB7 series) |
|
WS-PB-RACKMNT-PB6 |
Rackmount kit for PB6 series probes |
|
WS-PB-RSM |
Resource Monitor Option |
|
WS-PB-VLAN |
VLAN Monitor Opt. (for 1, 2, & 4 Port FE SwitchProbes only) |
|
WS-PB-WANTAP-EIA |
Additional Tap Kit for T1/E1 WAN (EIA530) |
|
WS-PB-WANTAP-RJ48 |
Addl Tap Kit for T1/D or E1/D WAN (RJ48/G.703/Bantam) |
|
WS-PB-WANTAP-RS2 |
Additional Tap Kit for T1/E1 WAN (RS232) |
|
WS-PB-WANTAP-RS4 |
Additional Tap Kit for T1/E1 WAN (RS422/RS449) |
|
WS-PB-WANTAP-V35 |
Additional Tap Kit for T1/E1 WAN (V.35) |
|
WS-PB-WANTAP-X211 |
Additional Tap Kit for T1/E1 WAN (X.21 Single Clock) |
|
WS-PB-WANTAP-X212 |
Additional Tap Kit for T1/E1 WAN (X.21 Dual Clock) |
